29-in Log Grapple Attachment Fits John Deere
Item No. 113223
29-in Log Grapple Attachment Fits John Deere Attachments 113223 JDLOGGP
Item No. 113223
In Stock

$1,449.99 $1,376.97


The 29-inch Log Grapple Attachment by Titan Attachments® is ideal for land clearing and logging operations where time and money are crucial. The grapple fits John Deere tractors equipped with the hook and pin quick connect carrier. With the 29-inch Log Grapple, you can easily and effectively clear and move fallen and cut down logs. With a 3,000 PSI hydraulic cylinder, you can safely secure your logs while in transit. The overall weight is only 385-pounds allowing you to handle more logs without sacrificing your loader's lifting capacity. With the impressive 42-inch opening height of the jaws combined with the length to the front of the tines being 30-inches, you will easily move larger amounts of logs on every trip saving you time. Smaller logs are not a problem either as the jaws can close past each other to a narrow gap of 6-inches allowing you to grasp logs as small 6-inches in diameter. The tines are constructed using 0.25-inch structural steel and a sidewall thickness of 0.375-inch to give you peace of mind knowing this log grapple will stand up to the toughest jobs.

NOTE: Not compatible with skid steer quick tach and global/euro style mounting systems.

IDEAL FOR REMOVING LOGS AND FALLEN TREES: The 29-inch Log Grapple is perfect for carrying logs and fallen tree limbs and trunks in hard to reach areas.

This attachment fits John Deere tractors with the hook and pin style mounting system. It is not compatible with the pin on style or Global/Euro style carriers. Add it to your tractor’s gear and supplies today to start simplifying your life!

EASY INSTALLATION: Don’t stress over tiny pieces of hardware or complicated instructions when hooking up your new attachment. It has a hook and pin style connection. It also includes greaseable pins and bushings, as well as hoses and ag style couplers, so you can quickly set it up and get to work!

DURABLE CONSTRUCTION: The hydraulic log grapple is built with 0.25-inch steel for the body and 0.375-inch steel for the sidewalls. The entire body of the 29-inch wide log grapple is powder-coated green to protect against rust and corrosion and to help keep your Hydraulic Log Grapple looking and performing like new.

DIMENSIONS: The overall width of the log grapple is 29-inches and has an overall height of 29.5-inches. The bottom tines are 30-inches apart at the tip of the jaw. The tines are made from 0.625-inch thick steel.


- Fits John Deere Hook and Pin
- Top pin set fits: H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, and 460 series loaders
- Bottom pin set fits: 500, 510, 520, 521, 540, 541, and 542 series Ag loaders
- Greaseable pins and bushings
- Hoses and ag couplers are included
- Hydraulic Cylinder is rated at 3,000 PSI

- Overall Width: 29-in.
- Opening Height: 42-in.
- Closing Height: 6-in.
- 30-in To End Of Bottom Tines
- Weight Capacity: 3,000 lb.
- Product Weight: 385 lb.

Additional Info

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov<

Rated 5/5 based on 2 customer reviews

Recommended Products