The affordable Titan Log Grapple attachment is ideal for land clearing and logging operations where time and money are crucial. The grapple is designed to fit John Deere tractors equipped with the hook and pin quick connect carrier. With the Titan 29” Log Grapple, you can easily and effectively clear and move fallen and cut down logs. With a 3000 PSI hydraulic cylinder, you can safely secure your logs while in transit. The overall weight is only 385 LB allowing you to handle more logs without sacrificing your loaders lifting capacity. With the impressive 42” opening height of the jaws combined with the length to the front of the tines being 30”, you will easily move larger amounts of logs on every trip saving you time. Smaller logs are not a problem either as the jaws can close past each other to a narrow gap of 6” allowing you to grasp logs as small 6” in diameter. The tines are constructed using 1/4” structural steel and has a side wall thickness of 3/8” to give you peace of mind knowing this log grapple will stand up to the toughest jobs. If you have a John Deere tractor with the hook and pin style mounting system, this is a must have attachment.
IDEAL FOR REMOVING LOGS AND FALLEN TREES: The 29” Log Grapple is perfect for carrying logs and fallen tree limbs and trunks in hard to reach areas.
COMPATIBLE WITH DIFFERENT SKID STEERS: This attachment is designed to fit John Deere tractors with the hook and pin style mounting system. It is not compatible with the pin on style or Global/Euro style carriers. Add it to your tractor’s gear and supplies today to start simplifying your life!
HEAVY DUTY POWDER COATED DESIGN: The hydraulic log grapple for John Deere tractors is built with 1/4" steel for the body and 3/8” steel for the sidewalls. The entire body of the 29” wide log grapple is powder coated to protect against rust and corrosion and to help keep your Hydraulic Log Grapple looking and performing like new.
EASY INSTALLATION: Don’t stress over tiny pieces of hardware or complicated instructions when hooking up your new attachment. It has a hook and pin style connection found on most John Deere Tractors. It also includes greaseable pins and bushings, as well as hoses and ag couplers, so you can quickly set it up and get to work!
DIMENSIONS: The overall width of the log grapple is 29” and has an overall height of 29-1/2". The bottom tines are 30" apart at the tip of the jaw. The tines are made from 5/8” thick steel.
FEATURES: - Designed to fit John Deere Hook and Pin. - Greaseable pins and bushings. - Hoses and ag couplers are included. - Hydraulic Cylinder is rated at 3,000 PSI. - NOT COMPATIBLE WITH SKID STEER QUICK TACH AND GLOBAL/EURO STYLE MOUNTING SYSTEMS.
SPECIFICATIONS: - Weight: 385 LB - Capacity: 3,000 LB - Overall Width: 29” - Opening Height: 42” - Closing Height: 6” - 30” To End Of Bottom Tines - Top pin set fits: H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, & 460 series loaders.
- Bottom pin set fits: 500, 510, 520, 521, 540, 541, & 542 series Ag loaders.