60-in Fine Grade Skeleton Rock Bucket w/ Teeth For John Deere Loader
Item No. 115005
60-in Fine Grade Skeleton Rock Bucket w/ Teeth For John Deere Loader Attachments 115005 JD60ROCKFG
Item No. 115005
In Stock



The Titan Attachment's 5-ft Fine Grade Rock Bucket is perfect for loading rock, tilling soil prior to planting, sifting debris from dirt or sand, and more! We designed the Titan Attachment's Rock Bucket to fit a John Deere loader with 3-inch tine spacing to sift smaller debris and material from your dirt, sand, and soil. We have also powder-coated these buckets green to protect against rust and corrosion, keeping your skeleton rock bucket looking and performing like new for years to come. The buckets 0.75-in cutting edge is equipped with replaceable C3R02 Teeth that are 6-in long, and the tines are a massive 0.5-in thick.

ECONOMICAL DESIGN: The 5-ft Fine Grade Rock Bucket fit for a John Deere loader is constructed using 0.5-in grade 50 structural steel. The sidewall thickness is an impressive 0.5-in thick, providing plenty of support. At the top of this rock and debris bucket, we have added a 4-in x 4-in 9-gauge tubular steel support, which adds to the structural integrity other rock buckets do not have.

HOOK AND PIN CONNECTION: This rock bucket is designed to fit John Deere tractors equipped with the hook and pin carrier. Top pin set fits H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, and 460 series loaders. The bottom pin set fits 500, 510, 520, 521, 540, 541, and 542 series Ag loaders.

A MUST HAVE FOR LANDSCAPING AND CONSTRUCTION: Titan Attachments low profile Rock Skeleton Bucket is designed to easily scoop and sift material from dirt, mulch rocks, debris and more. Making this bucket ideal in any situation and an invaluable attachment for your loader.

DIMENSIONS: With the overall dimensions of 60-in wide, 51.5-in deep, and 20-in high, you can carry plenty of material which allows you to make fewer trips, saving time and money. The lightweight design allows you to utilize your loader's lifting capacity and carry these more substantial loads.


- Fits John Deere hook and pin style carriers
- Reinforced side cutters and cutting edge for long life
- Welded on 0.75-in thick cutting edge
- Green powder-coated to prevent rust and corrosion
- 6 Replaceable teeth
- Open tines for sifting debris

- Overall Width: 60-in.
- Overall Length: 51.5-in.
- Spacing Between Tines: 3-in.
- Tine Thickness: 0.5-in.
- Cutting Edge: 0.75-in.
- Teeth: C3R02 (6-in. long)
- Tooth Count: 5
- Product Weight: 683 lb.

Additional Info

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov<

Rated 0/5 based on 0 customer reviews

Recommended Products