The long 1358203 bucket teeth are made to OEM specs and quality of Caterpillar 305CR 304.5 & 304CR teeth and come with the proprietary nut and bolt. This is a set of 4 teeth, 8 nuts, and 8 bolts. The high hardness tooth is perfect for your high power ground engaging machines digging hard dirt, gravel, or sand. These teeth requires no retainer or extra welding. Simply bolt on to the bucket lip to start digging.
Features: - Set of 4 teeth, 8 nuts, and 8 bolts
- OEM Quality - Heat treated and tempered steel - High hardness - Tooth Part #: 1358203 - Bolt Part #: 4K0367 - Nut Part#: 4f3656
Specifications: - Between bolt holes: 3" (center to center) - Bolt length: 2.5" - Tooth length: 11" - Tooth width: 2.25" - Weight: 25 lb each
share' Share Review by Anonymous User facebookfacebook Share Review by Anonymous User twittertwitter Share Review by Anonymous User LinkedInlinkedin Share Review by Anonymous User
Was this review helpful?
3 star rating
Seems well built, but not what I was looking for
Review by Martin L. on 22 Apr 2020review stating Seems well built, but not what I was looking for
I bought these to replace lost teeth on the Titan front hoe, which says the teeth are replaceable. These were the only teeth available that looked like the correct replacements. These teeth are much larger( both longer & wider), heavier, have longer bolt spacing, and Are designed to fit over a much heavier cutting edge. In order to use these, ill need to find heavier shim stock, re drill new holes(the bolts are too big to fit in the original holes), and stiffen up the mounting area. A lot of work for teeth that should simply bolt on.
share' Share Review by Martin L. on 22 Apr 2020 facebookfacebook Share Review by Martin L. on 22 Apr 2020twittertwitter Share Review by Martin L. on 22 Apr 2020LinkedInlinkedin Share Review by Martin L. on 22 Apr 2020