- Fits Category 1 tractors
- Runs on a standard 3 point linkage for Cat 1
- Cat 2 customers contact us for more information
- Works with your tractor's hydraulic system or a standard PTO pump (not included).
- An external PTO pump can power this backhoe if your tractor does not have hydraulics.
- Hydraulic thumb included
- If hooking up through your tractors hydraulics, bypassing the Backhoe's oil reservoir with the specialized bypass hose kit will be necessary.
- The bypass hose kit is available additionally if you plan to use your tractor's hydraulics. See our other listings for information.
- Weight: 1096 lbs
- Bucket size: 16"
- Max digging depth: 84"
- Max digging height: 110"
- Max digging radius: 112"
- Load over height: 62"
- Ground clearance: 11"
- Width at stabilizing legs: 71"
- Bucket rotation: 160 degrees
- Suggested engine hp: 35
- Connectors included: 1/4" & 3/4"
We're sorry but we do not have a video provided for this product at this time.
Customer Reviews (1)
- great valve backhoeReview by jdwhichard
Price Quality Value
(Posted on 4/23/2016)
Write Your Own Review
Questions on 7' ft 3 Point Backhoe with Thumb Excavator
Question: My questions pertain to hydraulics setup;
1) Is there a relief in system? On control valve?
2) Are there hoses for connecting reservoir/control valve to pump?
3) Is there a return line filter? If not, do I need one?
4) Pump suggestions? Prince HC-PTO-2A?
Answer: There is a relief valve on the control valve assembly of the backhoe. There is a feed and return hose with the backhoe. Those will be the only hoses you need if you are operating it off an external pto pump. There is an internal filter (within the tank). No additional filter is needed. That Prince pump will work fine. As long as it has a 11.6 GPM.
Question: Will this work with my Kubota B2620 tractor ? Do I need to buy a PTO bump for this ? Anything else needed to make this work with my tractor ? Thanks in advance.
Answer: As long as your tractor is a category 1, it will fit. You will need to purchase a PTO pump for this, or you could use your tractors hydraulics for it.
Question: I have a JD 2520 and I am looking for a backhoe. will this one work for my tractor and if not which do you recommend?
Answer: Hello Robin,
Thank you for contacting us! This backhoe fits all category 1 tractors. Therefore, if your tractor is a category 1, it will work perfectly. Have a great day!
Question: i have a mahindra 4540 4wd , show to have a 8.2 GPM, will these backhoes work ?
Answer: Hello Jeff,
Thank you for contacting us! If you have a category 1 tractor, this will work perfectly for you.
Have a wonderful day!
Question: Hello I am interested in the 7' ft 3 Point Backhoe with Thumb Excavator, I plan on purchasing a pto pump, how big is the hydraulic tank that comes with the backhoe. What is the GPM for this backhoe is it 11 gpm? What all do I need if I use the PTO hydraulic pump, im assuming i need the hoses to connect to the hydraulic tank on the backhoe, what else would I need? Can you please email me a pdf of the installation of this backhoe? All the help on this would greatly be appreciated. I have a kabota L4600 with front hydraulics but not hydraulic attachments to the back. It is a 3 point and cat 1, what is a cleaner set up using a PTO hydraulic pump or hooking up to the existing hydraulics of the tractor? I know in the notes it states that we would have to bypass the tractor hydraulic tank I am assuming then we would use the backhoe hydraulic tank instead. I just want to get the information so I can make an informed decision on what I should do. Your help is greatly appreciated. Thanks Lee
Answer: Thank you for your inquiry! You would need at least a 10 GPM, but I would highly recommend you call our office and talk with my friend Michael, he is very experienced with these backhoes. You are able to call him at 800-605-8241.
Best Regards -Austin
Question: Do you know when or if this backhoe will be available again. 7"ft. 3 point backhoe with thumb excavator attachment. thanks
Answer: We should have them back in stock in just a couple of weeks. Call us at 1-800-605-8241 M-F, 8am-5pm for updates. Thanks!
Question: The tractor I have is a John Deere 3038 with a 36.3 horse power motor and a 25 hp pto. S is the 25 horse power enough to run the pump. I will be using a pto pump and do you sell the pump to match the tractor?
Answer: Thank you for contacting us! You will want to use a pto pump with atleast 11 gallons per minute flow. We do not offer the pto pumps and you would need to purchase it at a local tractor supply store. -Ray
Question: Do you sell the Hydraulic PTO pump, if not which one is recommended? How many GPM?
Answer: We do not carry PTO Pumps. However, you would want to get a 10 GPM for this Backhoe. Prince makes a pretty good pump.
Best Regards -Todd
Question: WHAT SIZE(GPM) PTO PUMP IS NEEDED/RECOMMENED?
Answer: This attachment requires a PTO Pump with a minimum rating of 11 GPM.
Warm Regards -Jason
Question: will this backhoe work on my jd 4720?
If you have a category 1 you will be able to operate the backhoe off your hydraulics or PTO with the JD 4720. Let me know if you have any other questions.
Back to the product page
Ground Shipping: Most of our items are shipped through common ground carriers (UPS, FEDEX), we may also use USPS Priority Mail for smaller items. Items shipped via ground shipping normally are delivered in about 2-4 business days or less but in rare cases delivery can take up to 10 days. If we expect shipping to take longer than usual, we will contact you alerting you of the status of your purchase.
Freight Shipping: Large items (over 150LBS) are shipped by freight lines and are normally delivered in about 1 week (most are delivered in less than 1 week). We offer 100% free freight shipping to home or business, including liftgate service when necessary. We will email you the shipping/tracking info so you can track your shipment.
Orders are shipped promptly: Orders placed before noon will ship the same day. Shortly after your order ships, you will receive an email providing your tracking information. You can begin tracking your order online starting the next business day.
Order Shipping to Alaska or Hawaii: Small items like hydraulic couplers ship to Alaska or Hawaii for no additional charge. Larger items such as our Tractor Quick Links that can fit in a USPS Flat Rate box ship for no additional charge as well. Please call us to place an order if you want us to ship to Alaska or Hawaii. 800-605-8241
Order Shipping to Canada or Puerto Rico: Delivery to Canada and Puerto Rico - Please email or call us for shipping rates to these locations. Taxes or duties are not included in any prices quoted. Small items like hydraulic couplers ship via the Postal Service. Medium items ship via common ground carriers and large items over 150LBS ship via truck lines.
How long will it take until I receive my order? 90% of our shipments are delivered in 3 days or less and ship through FedEx or other similar carriers via regular ground service unless otherwise stated on the website. Most of our items ship from our warehouses in the Southeastern United States. Depending on your location you will receive your order between 2 and 10 business days unless otherwise stated on the product page for the particular item you are ordering. See average ground delivery times map below.
What if I need my order sooner? We genuinely want you to be 100% satisfied with your products and the service you receive. If you need your order by a specific date please email us your address and requested shipping time and we will be more than willing to give you your shipping options and costs so you can make the best purchasing decision.